WHY CHOOSE CAT® LIFT TRUCKS?

80 YEARS OF EXPERIENCE

As one of the most trusted forklift brands in the world for 80 years, Cat Lift Trucks offers quality and reliable forklifts with exceptional customer service.

EXPERIENCED DEALER NETWORK

We have a network of parts and support dealer throughout Malaysia plus our main branches in Perai, Shah Alam and Johor Bahru with our headquarters in Shah Alam.

WIDE RANGE

Our range of diesel powered forklift trucks, gas powered forklift trucks and electric powered forklift trucks are designed to fulfill a range of requirements; coming in a variety of sizes and with various abilities to suit your needs.

RELIABLE FORKLIFTS YOU CAN COUNT ON

Cat® Lift Trucks offers high-quality and reliable forklifts backed by an experienced dealer network you know you can depend on. Relying on more than 50 years of proven lift truck design experience to deliver a ruggedly reliable product.

OUR TOUGH & RELIABLE EQUIPMENT

AllElectricEngineWarehouseAttachment
Caterpillar Forklift Malaysia

IC Engine-powered counterbalance forklifts 1.5 ton to 3.5 ton

Caterpillar Forklift Malaysia

IC engine-powered counterbalance forklifts 4.0 ton – 5.5 ton

Caterpillar Forklift Malaysia

IC Engine-powered counterbalance forklift 7.0 ton to 10.0 ton

Caterpillar Forklift Malaysia

IC Engine-powered counterbalance forklift 12.0 ton to 15.0 ton

Caterpillar Forklift Malaysia

Electric Counter Balance 3 Wheeler

Caterpillar Forklift Malaysia

Electric Counter Balance 4 Wheeler

Caterpillar Forklift Malaysia

Stand On Reach Truck

Caterpillar Forklift Malaysia

Sit Down Reach Truck

Caterpillar Forklift Malaysia

Power Pallet Truck

Attachment

IC Engine-powered counterbalance forklifts 1.5 ton to 3.5 ton

Load capacity range: From 1.5 ton to 3.5 ton (Load center : 500mm)
Present detection system(PDS)
Power sources: The model line-up consists of diesel engine models and gasoline models.
Diesel engine models: S402 engine (Mitsubishi), S4S engine (Mitsubishi)
Gasoline engine models: K21/K25 engines (GCT)

The major truck specifications are shown as follows:

Main Truck Specifications

Scroll right to read more >>

Model Engine Load capacity Load center Max. fork height Overall width Overall length Overall height Turning radius
DP15NT S4Q2 Diesel 1500kg 500mm 3000mm 1065mm 2260mm 2065mm 1950mm
DP25NT S4Q2 Diesel 2500kg 500mm 3000mm 1150mm 2560mm 2074mm 2230mm
DP30NT S4S Diesel 3000kg 500mm 3000mm 1275mm 2735mm 2093mm 2380mm
DP35NT S4S Diesel 2500kg 500mm 3000mm 1290mm 2793mm 2103mm 2440mm
Model Engine Load capacity Load center Max. fork height Overall width Overall length Overall height Turning radius
GP15NT GK21 Gasoline 1500kg 500mm 3000mm 1065mm 2260mm 2065mm 1950mm
GP25NT GK21 Gasoline 2500kg 500mm 3000mm 1150mm 2560mm 2074mm 2230mm
GP30NT GK25 Gasoline 3000kg 500mm 3000mm 1275mm 2735mm 2093mm 2380mm
GP35NT GK25 Gasoline 2500kg 500mm 3000mm 1290mm 2793mm 2103mm 2440mm

IC engine-powered counterbalance forklifts 4.0 ton – 5.5 ton

Load capacity range: From 4.0 ton – 5.5 ton (Load center : 600mm)
Present detection system(PDS)
Power source: Gasoline engine (GK45) and diesel engine (Mitsubishi S6S)
The diesel models equipped with a low-vibration, low-cost S6S engine which has the equivalent performance to comply the Tier 2 emission requirements.

The major truck specifications are shown as follows: (Overall length does not include fork length.)

Main Truck Specifications

Scroll right to read more >>

Model Engine Transmission Load capacity Load center Overall width Overall length Overall height Turning radius
DP40N S6S diesel Automatic 3500kg 600mm 1415mm 3000mm 2250mm 2580mm
DP45N S6S diesel Automatic 4000kg 600mm 1460mm 3130mm 2250mm 2730mm
DP50N S6S diesel Automatic 5000kg 600mm 1460mm 3310mm 2250mm 2890mm
DP55N S6S diesel Automatic 5500kg 600mm 1460mm 3360mm 2250mm 2940mm

Scroll right to read more >>

Model Engine Transmission Load capacity Load center Overall width Overall length Overall height Turning radius
GP40N GK45 gasoline Automatic 3500kg 600mm 1415mm 3000mm 2250mm 2580mm
GP45N GK45 gasoline Automatic 4000kg 600mm 1460mm 3130mm 2250mm 2730mm
GP50N GK45 gasoline Automatic 5000kg 600mm 1460mm 3310mm 2250mm 2890mm
GP55N GK45 gasoline Automatic 5500kg 600mm 1460mm 3360mm 2250mm 2940mm

IC Engine-powered counterbalance forklift 7.0 ton to 10.0 ton

Present detection system(PDS)
Load capacity range: From 7.0 ton to 10.0 ton (Load center : 600mm)
Equipped with Isuzu 6BG1 diesel engine.

The main truck specifications are shown as follows: (The overall length does not include fork length.)

Main Truck Specifications:

Scroll right to read more >>

Model Engine Transmission Load capacity Load center Overall width Overall length Overall height Turning radius
DP70NH 6BG1 diesel Automatic 7000kg 600mm 1995mm 3600mm 2450mm 3360mm
DP80NH 6BG1 diesel Automatic 8000kg 600mm 2165mm 3940mm 2560mm 3650mm
DP100NH 6BG1 diesel Automatic 10000kg 600mm 2245mm 4255mm 2560mm 3900mm

IC Engine-powered counterbalance forklift 12.0 ton to 15.0 ton

Load capacity range: From 12 ton to 15 ton (Load center : 600mm)
Power source: Diesel engine (Mitsubishi 6D16-TL)
Present detection system(PDS)
Heavy duty forklifts equipped with MIstubishi 6D16-TL diesel engine which has the power and excellent torque to deliver even in the harshest environment. In addition, ‘low’ high-idle speed ensures less noise and engine wear.
Has three speed automatic transmissions, full suspension operator’s seat, small steering wheel as standards.

The main truck specifications are shown as follows:

Main Truck Specifications

Scroll right to read more >>

Model Load capacity Load center Engine Overall width Overall length Overall height (Headguard) Turning radius
DP120NM1 12000kg 600mm 6D16-TL diesel 2515mm 4375mm 3020mm 4060mm
DP135NM1 13500kg 600mm 6D16-TL diesel 2605mm 4525mm 3060mm 4160mm
DP150NM1 23000kg 600mm 6D16-TL diesel 2605mm 4830mm 3060mm 4550mm

Electric Counter Balance 3 Wheeler

Electric-powered counterbalance three wheel forklifts
Load capacity range: From 1.3 ton to 2.0 ton (Load center: 500mm)
Power source: Electric-powered motor

  • The EP-TCB series of 3-wheel electric lift trucks are designed to operate in a variety of demanding manufacturing, warehousing, and logistical environments.
  • Mast and Travel Interlock helps protect your operator and your loads.
  • Adjustable power settings to best suit the lifting task. Eight driving modes can be chosen from the energy saving “ECONOMY” to the high-performing “POWER” modes according to job requirements.
  • The Vacuum fluorescent display (VFD) is located at the right front of the cab so as not to obstruct the driver’s view of the forks. At the same time, it allows quick viewing and monitoring of important vehicle information such as traveling speed, battery discharge status, current time and key-on hours.

The major truck specifications are shown as follows:

Main Truck Specifications

Scroll right to read more >>

Model Load capacity Load Center Overall width Overall length Overall height Turning radius Battery max.capacity(5hr)
EP13TCB 1300kg 500mm 1090mm 1785mm 2050mm 1410mm 320AH/48V
EP15TCB 1500kg 500mm 1090mm 1885mm 2050mm 1510mm 350AH/48V
EP16TCB 1600kg 500mm 1090mm 1980mm 2050mm 1605mm 350AH/48V
EP18TCB 1800kg 500mm 1090mm 2035mm 2050mm 1660mm 390AH/48V
EP20TCB 2000kg 500mm 1090mm 2105mm 2050mm 1690mm 390AH/48V

Electric Counter Balance 4 Wheeler

Electric-powered counterbalance four wheel forklifts
Load capacity range: From 1.0 ton to 3.5 ton (Load center: 500mm)
Power source: Electric-powered motor

  • The model line-up includes high power models.
  • AC motors used for drive and load handling functions.
  • Present detection system(PDS)
  • Multifunctional LCD meter panel shows power consumption rate and remaining battery time. The panel has the following functions: Password entry, speed limiter (option), load meter (option), etc.
  • Fully-hydraulic Orbitrol power steering as standard. Electrical power steering (EPS) available as an option.
  • Fingertip Control (optional)
  • Auto torque up to climb slopes and carry heavy loads with ease.
  • Easy battery exchange (optional)

The major truck specifications are shown as follows:

Main Truck Specifications

Scroll right to read more >>

Model Load capacity Load Center Overall width Overall length Overall height Turning radius Battery max.capacity(5hr)
EP1.5CB 1500kg 500mm 3000mm 1070mm 1955mm 2080mm 1800mm 400AH/48V
EP2.5CB 2500kg 500mm 3000mm 1150mm 2285mm 2125mm 2100mm 565AH/48V
EP3.0CB 3000kg 500mm 3000mm 1225mm 2510mm 2190mm 2290mm 450AH/72V
EP3.5CB 3500kg 500mm 3000mm 1360mm 2735mm 2190mm 2500mm 450AH/72V

Stand On Reach Truck

  • Pedal with a presence switch
  • Soft Landing System
  • Unshakable Stability
  • Precise, perfect response to perfectly match the task on hand.
  • Eco Mode for energy saving
  • Advance Screen Technology, better visibility during environment change
  • Anti-slip control
  • Low floor height with 265mm
  • XL storage operator compartment
  • Comfortable waist pad for better comfort

Main Truck Specifications

Scroll right to read more >>

Model Load capacity Load Center Max. fork height Overall width Overall length Overall height Turning radius Battery max. capacity (5hr)
NRS15CB1 1500kg 500mm 3000mm 1090mm 1160mm 2220mm 1580mm 48V/350Ah
NRS18CB1 1800kg 500mm 3000mm 1090mm 1165mm 2220mm 1760mm 48V/370Ah
NRS18CB1 2000kg 500mm 3000mm 1190mm 1285mm 2280mm 1785mm 48V/370Ah
NRS18CB1 2500kg 500mm 3000mm 1190mm 1285mm 2280mm 1955mm 48V/370Ah
NRS18CB1 3000kg 500mm 4000mm 1230mm 1390mm 2280mm 2050mm 48V/370Ah

Sit Down Reach Truck

  • AOS Semi-auto Stacking
  • Shock Absorption Mast
  • Soft Landing
  • 360 degree steering
  • Wheel indicator
  • Easy to read display
  • Self-diagnosis Function
  • Operator Interlock System (OIS)
  • Cold Storage Application
  • Automatic Power-off

Main Truck Specifications

Scroll right to read more >>

Model Load capacity Load Center Max. fork height Overall width Overall length Overall height Turning radius Battery max. capacity (5hr)
NRF14CA 1400kg 600mm 6000mm 1090mm 1210mm 2160mm 1610mm 48V/360Ah
NRF16CA 1600kg 600mm 6000mm 1090mm 1210mm 2160mm 1705mm 48V/360Ah
NRF20CA 2000kg 600mm 6000mm 1090mm 1290mm 2160mm 1755mm 48V/500Ah

Power Pallet Truck

PEDESTRIAN POWER PALLET TRUCK

  • Ergonomic tiller arm
  • The chassis is completely closed, keeping water and dirt away from critical components
  • The strong fork construction combines robustness and agility for effortless pallet entry.
  • The linked castor wheels provide excellent stability and prevents wheel damage on ramps.

Scroll right to read more >>

 

Main Truck Specifications

Model Load Capacity Load center Max. fork height Overall width Overall length Overall height Turning radius Battery max. capacity (5hr)
NPP20N2 2000kg 600mm 135mm 720mm 1712mm 1372mm 1518mm 24V/250-375Ah
NPP20N2R 2000kg 600mm 135mm 720mm 1852mm 1350mm 1680mm 24V/250-375Ah

Tow Truck (NTR30-50N2)

Advanced steering functionality: adapts rapidly to every change in operator steering behaviour and travel speed, for smooth, relaxed and safe driving.
‘Flying start’ function: allows operator to begin acceleration from walk-beside position, before stepping onto the presence-detecting floor mat, for quicker access to drive.
High-comfort, triple-suspension floor: floating structure to dampen shocks and vibrations; sideways dampening to relax knees and ankles; and thick state-of-the-art matting to reduce micro-vibration.
Ergonomically shaped controls: including accelerator triggers, integrated into steering wheel –easily reached without releasing grip.
Motor compartment shield: easily removed from front of truck, by undoing two screws, to access main servicing point.

Scroll right to read more >>

Main Truck Specifications

Model Load Capacity Overall width Overall length Overall height Turning radius Battery max. capacity (5hr)
NTR30N2 3000kg 800mm 1450mm 1173mm 1306mm 24V/250-375Ah
NTR50N2 5000kg 800mm 1450mm 1173mm 1306mm 24V/250-375Ah

Attachment

OUR SERVICES

Forklift Sales icon

SALES

Comprehensive product line-up to meet your
every logistics need.

forklift rental icon

RENTAL

Forklift rental at a competitive price. Short term rental is also available upon special request.

second hand forklift icon

SECONDHAND

Refurbished and second-hand equipment, serviced and repaired by our expert in-house technicians are available.

forklift spare parts icon

SERVICE AND PARTS

Experience prompt aftermarket service delivering you fast and efficient original parts supply from our Japan and Singapore regional parts centre. Tyres, forks and safety devices from reputable brands are also available.

GET IN TOUCH WITH US



    83

    YEARS OF MANUFACTURING
    EXPERIENCE

    450

    SERVICE LOCATION

    5000

    SERVICE PERSONNEL

    Cat Lift Truck Malaysia

    Caterpillar forklift Malaysia